- Description
Kirby Generation Series Exhaust Bag Boot Emptor Gasket Assembly. Fits Models: Generation 3, Generation 4, Generation 5, Generation 6, Ultimate, Diamond Edition And Sentri This Gasket and collar slips into the horn of the base pan. Your Emptor and Bag attach to the horn in. This gasket is necessary for a proper seal of the Emptor to the Base Pan. If your gasket is loose or torn you will need to replace it to avoid a dust leak. Currently Kirby is supplying horn gaskets with Ivory collars.
Installation: First you must removal the old part by inserting a flat blade screwdriver between the base pan and the gasket. Twist the blade while prying the gasket ring toward the center of the exhaust horn. Remove the bent ring by pulling upward with a pair of pliers. On older units (G3/4) the gasket adaptor may be metal and be riveted in. It should still pry out with the screwdriver, do not remove or grind the rivets. The new gasket
Installation: First you must removal the old part by inserting a flat blade screwdriver between the base pan and the gasket. Twist the blade while prying the gasket ring toward the center of the exhaust horn. Remove the bent ring by pulling upward with a pair of pliers. On older units (G3/4) the gasket adaptor may be metal and be riveted in. It should still pry out with the screwdriver, do not remove or grind the rivets. The new gasket
You May Like
-
-
￥ 94.37
-
-
￥ 20.98
-
-
￥ 47.19
-
-
￥ 724.50